Items already purchased are below blue line and will show "Purchased" instead of price.
Items above blue line are a "wish list" of possible future items.
Original equipment on Chrome hand control models.
45282-99
Should fit 97 and up models.
$23.95
each
Available at Harley Davidson
Add a subtle chrome detail to match your chrome hand controls. This Chrome Turn Signal Swivel kit is a durable and stylish replacement for the Original Equipment zinc-plated swivel.
68373-02
Fits '02-later VRSC™ models.
$16.96
Available at Harley Davidson
Stock clutch on new 08 VRSC, this retrofits pervious VRSCRs.
37938-08K
Fits:’02-’06 VRSC models.
image is not accurate
$285
Available at Harley Davidson
(for Evelyn's Sportster)
Mustang seats are premium seats and add a level of comfort far better than stock seats. This seat is for Evelyn's sportster but makes it easier for Bob to ride as he hates her stock seat. Since her bike only has a solo seat the rear portion of this seat (sold separately) is not needed.
Fits 2004-2007 Sportster, Vintage Solo, 3.3 gal.
No Studs, No Conchos
76157
$199.00
Available online only
Made from medium weight top quality "Tri-Max®" polyester. Seams electronically heat sealed making cover 100% waterproof. Heat shield lower panels and soft windshield protector. Snug elastic bottom with one-inch grommets. Unique "24-7" ventilation system minimizes condensation build-up. Packed into matching carry all. Five-year "No Hassle" warranty. Available in Black/Red/Silver 1000, Black/Yellow/Silver 1200, and Black/Blue/Silver 1300. Sizes to fit every model M / L / XL / XXL
MC-1300
color - Black/Blue/Silver
size - XXL
web page:
http://www.nelsonrigg.com/covers.htm
bottom of page center
XX-Large $59.95
Available online
from
Nelson Rigg
website
www.nelsonrigg.com
Designed for S.E. 95" Big Bore and other 95" motor. (S.E.95" Big Bore - less than 100ft-lbs)
- Fits 98 and up Big Twin Models
- Engine size up to 95" (1,550cc) with carb, exhaust,ignition and cam upgrades.
- 20%clutch pull reduction from a stock setup.
- Up to 95" motor with a stock spring
- Up to 116" motor with a Heavy-Duty spring
- Up to 100hp/100ft-lbs motor, use VP83T or with a heavy-duty spring on high performance motor.
VP83S
$225.00
Available online only
Dress your tail lamp in style. This chrome-plated Tail Light Cover follows the contour of the lens for a custom look. Self-adhesive backing for easy installation.
68478-05
Fits '02-'06 VRSC™ models and '07-later VRSCD and VRSCR models with 180mm rear tire.
Purchased
Whether this is the first piece or the last piece you are adding to chrome your hand controls this is a must have with its smooth lines. These housings will accept stock ’96-‘06 H-D switches. Add our Handlebar Control Dress-up Kit (P/N 9119 or 9126) that includes everything else you need to complete your family of chrome hand controls.
Kuryakyn_9149
Fits:’96-’06 H-D models.
Purchased
Replace the Original Equipment flat black bullet turn signal housings with brilliant chrome. Kit includes chrome-plated bullet-style turn signal housings, chrome rear supports, and amber-colored lenses.
69065-05
Front and Rear Kit
Fits '06 domestic VRSCR models.
Purchased
Replace your Original Equipment oil dipstick with this custom-styled version featuring an easy-to-see mechanical temperature readout with "Harley-Davidson®" logo. A knurled, chrome-plated aluminum cap completes the styling and provides an easy grip for removal.
62962-01A
Fits '02-later VRSC™ models.
Purchased
The Chrome Coolant Hose Cover picks up where the stock water pump cover leaves off. This cover extends from the tee behind the upper frame to the top of the water pump. All necessary mounting hardware is included.
29770-01
Fits '02-later VRSC™ models.
Purchased
Protect the finish of your VRSC™ model's air box cover from scratches caused by keys, belt buckles and road debris. This "tank" bra is made with non-abrasive, fleece-backed vinyl and features an embroidered "Bar & Shield" logo. Designed for easy installation and a custom fit.
57850-01
Fits '02-later VRSC™ models.
Purchased
Continue the "chromed-out" theme with these Hand Control Levers. Cast from aluminum, these levers feature a custom finish designed to match the Original Equipment or acessory chromed hand control components.
42270-06
Fits only '06 VRSC™ models.
Purchased
Add a splash of chrome to the Street Rod™ model. Stock on A model will replace black horn cover on R models.
69040-01A
Fits VRSC™ models.
Purchased
Add a splash of chrome to the Street Rod™ model's sporting profile. The Original Equipment black painted brackets are polished and plated to a show quality shine.
51097-05
Fits only '06-07 VRSCR™ models.
Purchased
A must-have accessory for all VRSC™ motorcycle owners, this decoratively polished and chrome-plated upper belt guard offers custom styling to an already radical bike. Mount it using your Original Equipment Mounting hardware. Instructions included for easy installation
60469-01A
Fits '02-'06 VRSC™ and '07 VRSCR models (except '06 VRSCSE2).
Purchased
Chrome out the entire belt and sprocket area with the addition of this uniquely styled, chrome-plated accessory. Featuring a one-of-a-kind shape and an outlined Bar & Shield logo, it's also styled to match the Chrome Upper Belt Guard P/N 60469-01 for seamless integration when installed together. Kit comes complete with hardware and instructions for installation.
60484--01A
Fits '02-'06 VRSC™ and '07 VRSCR models (except '06 VRSCSE2).
Purchased
Complete the radical styling of your VRSC™ model's swingarm with these custom pivot bolt covers, designed exclusively for the VRSC™. Easy press-fit installation. Sold in pairs.
48893-01
Fits '02-later VRSC™ models.
Purchased
• Use Tailbag or Saddlebag separately or as a single unit
• 1680 Denier ballistic nylon construction for durability
• Soft tri-cot interior lining
• Built-in bungee cord hooks hide away when not in use
• Bottom Velcro® flap and quickrelease buckles for Cortech Sport Saddlebag attachment
• Easy access, top loading main compartment
• Top flap, internal organizer pocket
• Scotchlite™ 3M reflective striping and logo
• Comfortable rubberized carrying handle
• Tour Master Jacquard shoulder strap
• Rain Cover included
• TPR zipper pulls
• 8.5"H x 15"W x 13"L (16 liter)
• 19"W (18 Liter) Expanded
• Available colors: Black, Red, Blue
Tail Bag
Website for this product click here
Purchased
These will be the most comfortable hand grips you’ll ever take hold of. Styled to match the popular ISO™-Pegs, they dampen handlebar vibration while providing a sure, cushioned feel for long haul comfort. The removable end caps allow access to handlebar air reservoir fittings. Your choice of many different colored trim rings add a tasteful accent to any paint scheme. ISO-Grips will fit all Harley-Davidson® models with dual cable throttle controls.
6205
ISO-Grips with Chrome Accent (pr).
Purchased
Show off your tail. This chrome-plated cover fits over the stock fender mount license plate bracket. The mirror-finished cover features a custom reflector with graphics. Includes mounting hardware for cover and license plate.
59726-04
Fits '04-later VRSC models.
Purchased
These high quality, dramatic custom pegs are machined from premium 6061-T6 aluminum, then polished and chrome-plated for long-lasting good looks. To give you more options, the chromed, billet aluminum shifter pegs and footpegs are offered in two different combinations of knurling and rubber band.
49256-99
Fits all models (except '06 VRSCA models).
Purchased
Features include embroidered logos, full-length Velcro® closure over zipper, and plush nylon pile inside lining. Features silver "Harley-Davidson®" logo. (Used to cover side gas tank and fill frame void.)
91773-85
Earl Small's H-D online price: US $42.46.
Purchased
Security and convenience in one. The Harley-Davidson® Smart Siren II combines the functionality of the smart siren and pager transmitter into one easy-to-install unit. Featuring a built in back-up power supply, the siren and transmitter functions will continue to operate even if the wires are cut or the vehicle battery is disconnected. When combined with the Pager Receiver II (sold separately), the integrated FM transmitter can warn of tampering up to 1/2 mile away. Smart Siren II features an enhanced sound chamber, a redesigned internal battery access cover, and ultra low power consumption during the standby mode. When activated, the Security System Fob arm and disarm commands are confirmed with a chirp feature. Smart Siren II is certified for use in North America.
68328-06
Fits '02-'07 VRSC™, '04-'07 Dyna™, '03-'07 Softail® and '02-'07 Touring models..
Purchased
Turn signal module adds an auxiliary brake light and running light function to your existing turn signals for auxiliary rear lighting. Red lenses glow when the headlamp is on, and increase in intensity when brakes or turn signals are activated. Easy-to-install, the kit simply plugs into your existing wiring harness. Red turn signal lenses are included. Meets DOT requirements.
69464-06
Fits '02-'06 VRSC™ models equipped with stock bullet turn signals.
Purchased
This high flow air cleaner provides the clean stable air the engine needs for maximum performance. The washable filter element does not require oiling and is ready to go.
29793-02C
Fits '02-later VRSC™ model.
Purchased
See even more of the world that you just passed. This exclusive-design Split Vision Mirror minimizes blind spots and provides a wide panoramic rear view of the left and right lane, and the road behind you. The mirror features a large primary panel for normal view, and a second outboard convex panel for a wider field of vision. Chrome-plated to a brilliant shine, the mirror's shape adds a contemporary touch to the traditional teardrop design. The deep embossed "Harley-Davidson®" script and the curving slotted stem set this mirror apart from the others. Sold in pairs.
92190-06
Fits '82-later models.
Purchased
Check your oil level and oil temperature with the push of a button. Add function and style by replacing your stock dipstick with this hard working version. No more grabbing a rag to pull your hot dipstick. No more oil drips on your pipes and on the garage floor. Simply push the button and this chrome dipstick lights up with brilliant blue backlight. Oil level is indicated with a four segment readout - it even reminds you to check your oil when it is hot. Designed to be waterproof, the LCD display operates on a long-lasting, replaceable Lithium coin-type battery (CR2032 3V, P/N 66373-06). Display features a low battery indicator, and press-and-hold feature to toggle between Fahrenheit and Celsius.
62946-05
Fits '99-'06 Touring models except models equipped with a sidecar. Does not fit with Chrome Oil Filler Spout Cover P/N 66133-99.
Purchased
The Stratum Collection from Harley-Davidson® adds depth and shadows to your custom ride. The layered design is formed from billet aluminum, polished and chrome-plated to a mirror finish. The bold "1550" script is filled with black for a distinctive contrast. Includes chrome-plated mounting hardware.
32532-01
Fits '99-later Twin Cam-equipped models.
Purchased
Kick your customizing into gear with this collection of high quality, polished stainless steel shift linkages. Available in a variety of designs, the linkages feature aircraft quality rod ends, a stainless steel transmission lever cover and decorative acorn nuts and bolts for a complete custom look. The polished, stainless steel finish will last without chipping, peeling or discoloring. Easy-to-install.
33814-98A
Fits '86-later Softail® and Touring models.
Purchased
The latest in the family of Road King®-inspired accessories, this chrome-plated steel fender skirt features four raised accent ribs and a die-cast Road King® Classic medallion in chrome with black accents. Mounting hardware included.
59005-98
Fits '80-later Touring models equipped with Original Equipment fender skirt. .
Purchased
Motor mount quality, carbon steel, black wrinkle powder coated bracket holds both trumpets and horn cover with compressor underneath. Air induction system uses a single manifold which uses only 1 air hose not 3. Easy installation. Affordable price. On-demand air compressor. Aircraft braided stainless hose. All hardware included. 30 AMP horn relay included. Air horn compressor installs in existing stock HD chrome housing on late model Harley's (PART# 69012-93A) These bad boys are extremely loud on SUVs, Pick-ups, Hot Rods, the full size car/truck battery makes a huge difference! More electricity=more sound.
OUR HORNS ARE THE ONLY AIR HORNS on the market with a removable end caps for cleaning, maintenance, or replacement of our diaphragm. If dirt gets inside your horn, it will prevent the diaphragm from vibrating and will interfere with the sound from your horn. Some foreign made horns have a crimped plastic or pot metal back disguised by a chrome cover that cannot be removed for cleaning so whatever gets in your horn, stays in your horn. Next time you are on the road, look at the truck horns and you will see that they also have a removable sound unit for maintenance(a standard in the Marine and Trucking industry). HOWARD'S HORNS ARE ALL METAL AND CONTAIN NO TIN COMPONENTS.
Purchased
Kit features redesigned cast backplate with integral breather and mounting brackets for simplified installation, and a new air cleaner element that does not require oiling.This Big Bore Kit lets you increase your Twin-Cam equipped model displacement from 88 cubic inches (1450cc) to 95 cubic inches (1550cc). The kit includes cylinders, pistons, clips, rings, air cleaner, breather hardware and gaskets. A high-performance clutch spring is included to provide the additional clutch capacity required by the extra power. Requires separate purchase of primary cover gasket. This kit is street-legal when used with stock mufflers. (Not all components shown).
29774-02B
Black (shown) Fits '01-'06 EFI Softail® (except '05 FLSTFI 15th Anniversary) models, '02-'06 EFI Touring and '04-'06 EFI Dyna™ models.
Purchased
Original Equipment on '06-later Dyna™ and '07 Softail® and Touring models, this Automatic Primary Chain Adjuster eliminates the need to manually adjust the primary chain tension at traditional service intervals.
40063-05
Fits '85-'06 Evolution® 1340 and Twin Cam powertrain. Requires separate purchase of model-specific primary gasket and seals.
Purchased
Add a final detail to your Touring model with this Chrome Oil Vent Line, constructed from steel tubing that's polished and chrome-plated for a brilliant finish. Kit includes polished and chrome-plated compression fittings, and installs easily for a custom look.
33111-02
Fits '02-later Touring models. Also fits '99-later Touring models equipped with Oil Filler Spout P/Ns 62470-02, 62453-02 or 62454-02..
Purchased
The look of classic Cadillac sytle tail lights redesigned to fit original 1988 and later H-D directional housings. Easy to install. Simply remove the stock lenses, make a few connections and install your new Dagmar Lights with their high quality lenses and show quality chrome metallic housings. Sold in pairs with Red, Amber and Clear lenses.
DL-D: Designed for the front or rear directional signals, these units assist in getting your bike noticed in traffic day or night...while at the same time adding a very unique look.
Purchased
Add chrome to an often-overlooked area with this cover, featuring the same high quality bright finish process used on most of our accessories.
31783-00
Fits all '94-later models (except '02-later VRSC models)
Purchased
Turn signal module adds an auxiliary brake light and running light function to your existing turn signals for auxiliary rear lighting. Easy to install, the kit simply plugs into your existing wiring harness. Red turn signal lenses are included. Meets DOT requirements.
69461-06
Flat Lens Style
Fits all '96-later Softail® models and '97-later Touring models equipped with flat lens style turn signals. (Does not fit with Narrow Chrome Directional Bar P/N 68611-98.)
Purchased
Fork Lock Cover
This chrome-plated aluminum die-cast cover finishes the look of the Road King® fork lock. The protective cover adds a finishing touch to the handlebar cover, and the smooth domed lid flips up to provide access to the fork lock. Includes chrome-plated flush-mount hardware.
71790-05
Fits '94-later FLHR models.
Purchased
This custom Backrest Mounting Plate replaces the stamped metal mount for a distinctive look. The mirror finished bracket, chrome-plated mounting hardware and vivid black insert contrasts with a leather or vinyl backrest pad to dress your Touring bike in style.
52825-05
Fits Touring models equipped with Detachable SIssy Bar Upright P/N 52806-97B or 52933-97B.
Purchased
Chrome die-cast front axle nut covers with contoured profile. The unique profile of these covers makes them appear smaller than other axle nut covers when installed. Sold in pairs.
43051-01
Fits '00-later Touring models and '04 Dyna models (except FXDWG).
Purchased
Front Stainless Steel Braided Brake Lines, Extended
These stainless steel braided brake lines give you the extra reach you need when installing handlebars that are taller, wider or pulled back closer to the rider. With +2", +4", and +6" lengths (when compared to H-D standard length stainless steel braided brake lines), you are sure to find the line that meets your needs. Dual disc model kits feature three brake lines and a chrome-plated junction tee, while single disc models kits feature a single brake line. Harley-Davidson stainless steel brake line kits meet all D.O.T. requirements, and include chrome-plated banjo ends and all necessary hardware.
45224-04
6" Front, Dual Disc
6 inches longer than P/N 45212-97B.
Purchased
These compact helmet speakers are high volume, thin bodied speakers designed specifically for in helmet use providing great sound quality. These stereo speakers which plug into any personal AM/FM radio, tape, MP3 or CD player are thin and comfortable when mounted inside your helmet. Just press them into your helmet's ear pockets or hang them directly to the helmet lining using the provided Velcro pads.
http://www.clearercom.com/Helmetspeaker.htm
An indented area in the padding of your helmet close to your ear is a good place for the helmet headphones. You will receive excellent sound quality with the speakers placed anywhere in the area of padding close to your ears, and the indented area will help to keep the speakers from interfering with the feel and fit of your helmet.
Purchased
Great for motorcycle, truck and car! Sold in pairs. Purchase two pairs for truck or car use. The beauty of chrome with the durability of machined brass, featuring a laser-etched "Bar & Shield" logo painted black. Available with a traditional, unique fluted or rugged acorn shaped cylinder. Will not seize on valve stems and includes O-rings for reliable seal.
41148-98
Acorn Nut with "Bar & Shield"
Universal fitment. Also fits suspension air valves. Sold in pairs.
Purchased
The only security system designed and approved by the Harley-Davidson Motor Company. When armed, the Security System disables the starter and ignition while monitoring the electrical system and vehicle motion with adjustable sensitivity. Minor disturbances trigger a momentary warning; major ones an unbroken thirty-second alarm after which the Security System returns to monitoring. A distinctive four-way flasher pattern is the alarm signal. An optional self-powered Smart Siren Kit adds a piercing scream, which sounds even if the battery cable is cut. Harley-Davidson Factory Security System includes Security Module (integrated security, turn signal and bank angle sensor), Remote Control Waterproof Key Fob and Pocket-Sized Operation Manual. An Extended Storage Mode keeps the battery from discharging when the Security System is armed for extended periods of time. 2000 model year vehicles require installation kits (sold separately).
68200-00D
Fits '02-'06 VRSCA, VRSCB, VRSCD, '04-'06 XL, '00-'03 Dyna™and '00-'06 Touring models. When armed, the Security System disables the starter and ignition while monitoring the electrical system and vehicle motion with adjustable sensitivity. Minor disturbances trigger a momentary warning; major ones an unbroken thirty-second alarm after which the Security System returns to monitoring. A distinctive four-way flasher pattern is the alarm signal. An optional self-powered Smart Siren Kit adds a piercing scream, which sounds even if the battery cable is cut.
The Security System is armed and disarmed with a remote control waterproof key fob utilizing state-of-the-art rolling code technology. If the key fob is not available, the rider may disarm the system by keying a previously entered personal code on the turn signal switches. A flashing status indicator informs the rider that the Security System is armed or disarmed.
When armed in the Transport Mode, the Security System disables the starter and ignition, but monitors only the electrical system, not vehicle motion. The vehicle may be moved, but electrical tampering triggers an alarm.
An Extended Storage Mode keeps the battery from discharging when the Security System is armed for extended periods of time.
The Security System is compatible with FL Touring models equipped with approved TLE/Ultra Sidecars when the system is configured as described in the SIDECAR OWNER'S MANUAL..
Purchased
Security and convenience in one. The Harley-Davidson Smart Siren II combines the functionality of the smart siren and pager transmitter into one easy-to-install unit. Featuring a built in back-up power supply, the siren and transmitter functions will continue to operate even if the wires are cut or the vehicle battery is disconnected. When combined with the Pager Receiver II (sold separately), the integrated FM transmitter can warn of tampering up to 1/2 mile away. Smart Siren II features an enhanced sound chamber, a redesigned internal battery access cover, and ultra low power consumption during the standby mode. When activated, the Security System Fob arm and disarm commands are confirmed with a chirp feature. Smart Siren II is certified for use in North America.
68328-06
Fits '02-'06 VRSC™, '04-'06 Dyna™, '03-'06 Softail®and '02-'06 Touring models.
Purchased
Flip-up chin and face shield, with the click of a button. Shatterproof face shield. Fiberglass aerodynamic shell. Formfitting, removable inner liner. Chin and forehead venting. Double D-ring chin strap retention system. Face shield is removable without tools. Helmet bag included. Meets DOT Requirements. HJC, 3 lbs. 6 oz.
97212-02V
color: Black
Purchased
Constructed of fully-ventilated, nylon mesh. Body armor in shoulders and elbows. Adjustable waist and wrist tabs, hand-warmer pockets, and embroidered Bar & Shield logo on front and reflective Bar & Shield logo patch on back.
98225-06VM
Purchased
These versatile nets feature 6 attaching hooks to hold your cargo securely. For helmets, small packages, etc. Works great with with chrome bungee nuts.
98170-88T
18 inches.
Purchased
Zip-up bag for carrying full face helmet. Soft inner liner to protect helmet from scratches. Compact bag fits easily in saddle bag. Outside pocket for extra storage. Bar & Shield graphics.
98165-02V
Purchased
Power Commander
The PC is a fuel injection and ignition timing (on some models) adjustment unit that plugs "inline" with the bikes' stock ECU. The PC uses original equipment style connectors so that no splicing or cutting of the harness is required. Most installations take less than 15 minutes, some as little as 5 minutes. Changes are made to the bikes fuel and ignition curves via the PC's onboard microprocessor. Using this technology we are able to offer a large area of adjustment without making any permanent changes to the bikes' ECU (electronic control unit). Removing the PC returns the bike to its previous stock condition. The Power Commander can be ordered preprogrammed with a your choice of several settings, based on the modifications to your bike. The unit also comes complete with software and cable link that allows you to change between different maps or make adjustments to a map file.
CHUBBY® R.K. II BARS
PART # WO518
Custom Chubbys®, Specifically Designed for the Road King, Stretch Frame Custom Bikes and Riders of Average Height and Above. They are 35.5" Wide, have a 14.25" Pullback with Fluid Bends that Set You in the Optimum Riding Position with Hand & Wrist Placement for Maximum Comfort & Control!!! Custom 1 1/4" Thick, Knurled, Pre Drilled for Internal Wiring with a Brilliant Show Chrome Finish. Use Your Stock Controls, Cables, Brake Line & Wiring.
Create a smoother, creamier look by concealing unsightly frame welds with this luscious, chrome-plated steel cover. Installs easily in just a matter of minutes.
http://www.kuryakyn.com/products.asp?bn=harley&ci=3057
Fits: '97-'05 FLT (Dressers and Road Kings)
Purchased
Designed from a clean sheet, our new neck cover is a smooth, quickly installed addition to any H-D Touring Model. The right side cover has been enlarged enough to accommodate the in-line cruise control pull-off switch found on the idle cable of all ’02 and later models. This Deluxe kit, P/N 8146, includes two snap on down-tube covers to add coverage almost all the way to the foot board mounts. Easy to install and great looking, this is a truly first class part!
http://www.kuryakyn.com/products.asp?bn=harley&ci=3318
Note: The snap on tube covers that are included in the 8146 kit are offered separately to allow customers that have purchased the basic version of this neck cover, P/N 8168, to upgrade. When ordering P/N 8146, it is NOT necessary to order P/N 8227 separately
Purchased
The Jet Stream fits all Road King Classic Stock Saddle bags, part # 90544-97. The current model is still delivered with the same stock leather bags. Each set includes accessories for a left and right bag.
Frustrated that there were no leather saddle bag chrome accessories, founders Stephen Price and Aaron Price decided to design and manufacture their own, and formed Chrome Concepts, Inc. Today, the company develops the ultimate saddle bag appointments. Crafted from the highest quality triple-chrome plated materials, Chrome Concepts prides itself on the fine workmanship that goes into every piece it produces. The premier products include the “Jet Steam” for Road King Classic saddlebags, but more designs are currently under development and will be available soon. Thanks for choosing the best in chrome accent pieces.
Purchased
Fits '74-later XL, FXD, FXR, FX and FX Softail®models with stock and accessory 1" dia. handlebar (except FXSTD, FXSTS, FXSTSB, FLSTS, FXLR, '96-later XL Customs and '99-later FXR).
56170-83TA
Purchased
This exclusive Headbolt Bridge covers both the headbolts and spark plug with a splash of chrome and an engraved "Bar & Shield" emblem. Easy to install with unique headbolt mounts. Kit includes all necessary mounting hardware. Sold in pairs.
43858-00
Fits '99-later Twin Cam 88®-equipped models. (Not to be used on models equipped with fairing lowers.) Chrome
Purchased
Add a finished chrome look to the left side of your Twin Cam-equipped engine with this stylish chrome die-cast cover. Easy installation with included hardware. (Shift linkage removed for photo.)
32753-01
Fits '99-later Touring models, '99-later Dyna models with forward controls, and '00-later Softail models. Will not fit with Engine Transmission Top Covers 66505-00, 66510-00 and 66513-00.
Purchased
Add some chrome to the Twin Cam engine with this polished and chrome-plated Oil Hose Cover. We start with the Original Equipment cover, to ensure correct fitment, then polish and chrome plate it to the high standards you've come to expect from Genuine Motor Accessories. Includes chrome-plated mounting hardware.
37946-99
Fits '99-later Touring models. (Does not fit with Twin Cam Premium Oil Cooler for Touring Models P/N 62868-99.).
Purchased
As a replacement for the plain stock washer on Road King models, this chrome-plated billet console washer features a three dimensional, machined-in Bullseye design, highlighted with black accent rings. A stainless steel mounting screw is provided and, once installed, is hidden under the black center insert with Bar & Shield logo.
94753-99
Fits all '94-later FLHR (except FLHRS) models, '84-later Softail tank panels with screw mounts.
Purchased
Here's a stylish way to get your feet into the wind. This beautifully polished and chrome-plated billet aluminum footpeg mount kit installs easily on your engine guard, and lets you stretch your legs on cross-country rides. Works with all H-D® male-mount footpegs.
50957-02A
Purchased
Great by themselves or with our popular Chrome and Rubber Handgrips and Footboard Inserts, these cast, chrome-plated footpegs feature durable rubber treads with a molded-in "Bar & Shield". These pegs are adjustable (hex key included) so your feet ride on the tread comfortably whether used as rider, highway or passenger pegs
50130-95
Purchased
Lace-up waterproof boots with HD logo. Fully lined and cushioned.
MIW9513711
color - Black
Purchased
Soft, supple deer-touch leather. Decorative seaming and two front pockets. Outside zipper with hidden snap placket at bottom of leg. Cuttable hem. Custom metal Bar & Shield badge below the belt says everything you need to know - Harley-Davidson®.
HD97007-05VM
color - Black
size - XL
Purchased
Our new Extended Girder Shift Lever is the perfect complement to our Extended Girder Brake Pedal. With an 8" length, it is about 1-3/4" longer than a stock FLT or FLST shift lever. It works as both front or rear on footboard equipped Harleys. This chrome beauty will give you a lot of additional room on the footboard. You can slide your foot around without having to worry about bumping into your shift pegs.
1026 - one for rear shifter
Purchased
Designed to mount to the Brake Master Cylinder Clamp, this polished stainless steel temperature gauge will keep you in touch with the outside air temperature. Styled to match the original equipment gauge design and the Clutch Lever Bracket Clamp Clock, the thermometer is available with black or silver face. This waterproof gauge is simple to install.
75102-04
Black Face - Fits all models. Not compatible with Auxiliary Accessory Switch Housing Kits.
Purchased
The freedom of the open road dictates the final destination, but sometimes you need to be there on time. Designed to mount to your Clutch Lever Bracket Clamp, this polished stainless steel clock will keep you on schedule. Styled to match Original Equipment gauge design, the clock is available with black or silver face. Battery - powered and is waterproof to three atmospheres so you won't have to worry when the weather turns bad.
75041-03
Black Face - Fits all models.
Purchased
Screamin' Eagle® Stage I Kit for EFI Models
Also ECM Calibration
If you want more torque from your Twin Cam 88-equipped model, this kit provides a freer breathing capability to pump-up the power of your EFI-equipped motorcycle. This kit includes air cleaner, breather, and all required hardware. Street legal when used with stock mufflers. Not all components shown.
29773-02A
Fits '01-later EFI Softail, '02-later EFI Touring and '04-later EFI Dyna models. Requires ECM calibration.
Purchased
Chrome-plated caliper covers styled with stepped contours and textured recess for a distinctive look. Split cover design does not require brake line removal. From the workshop of Wyatt Fuller.
43798-00
Fits ’00-later Touring models. (Does not work with Braided Brake Lines.) (Sold in pairs.)
Purchased
This sleek chrome-plated cover is shaped to hide the "working" components of the rear brake master cylinder, while allowing easy access for routine maintenance. A formed rubber retainer allows for easy installation and removal.
45318-99
Fits ’99-later Touring models without fairing lowers.
Purchased
Replace your stock painted aluminum controls with brilliant chrome, without compromising on quality. This kit is manufactured from the Original Equipment components. When combined with Chrome Switch Housing Kit, Chrome Switch Cap Kit and other Genuine Motor Accessories, this front brake control kit provides a look that does more than stop your bike - it'll stop traffic.
45281-99C
Fits all '96-'03 XL models and '96-later Dyna, Softail, and Touring models with dual disc front brakes. (Does not fit VRSC models or models equipped with hydraulic clutch.)
Purchased
Clutch anti-rattle clip and new pivot bushings included. U.S. Patent No. 5311792 and Design Patent No. D348,035.
45075-96
Fits all '96-'03 XL models and '96-later Dyna, Softail and Touring mdoels. (Does not fit police models, VRSC models and models equipped with hydraulic clutch).
Purchased
Use this kit to convert your bike from black to chrome with left and right, upper and lower housings. Accommodates radio switches used on Classic and FLHT standard models and accommodates all stock switches on Ultra models (Cruise, Radio, Intercom, etc.).
70228-96B
Touring Models
Fits all '96-later FLHTCU/I and FLTCU models, '98-later FLTR/I models and '02-later FLHRCI models. Also fits '02-later FLHR/I models equipped with Cruise Control Kit P/N 77183-02.
Purchased
Die-cast chrome covers provide a custom look to your stock banjo bolts and handlebar clutch ferrule. Fits clutch ferrule on handlebar and banjo bolts on brake master cylinders and calipers. Installs in seconds.
32714-98
Fits '84-later models (except '02-later VRSC) with stock master cylinders and calipers. (Does not fit with Stainless Steel Braided Brake Lines.) (Will not fit models equipped with hydraulic clutch.)
Purchased
Replace the black rubber throttle and idle cable boots with brilliant chrome. Machined from billet aluminum, this two piece "ball-milled" dust cover offers a striking contrast to Original Equipment black cables, and a natural finishing touch when installing braided stainless steel cables. Easy to install with included hardware.
64115-04
Fits '96-later Touring models (except FLHRS models with Original Equipment handlebars), and '96-later FXSTB and FLSTS models.
Purchased
A pilot knows the thrill of taking wing, and that feeling is the inspiration for these smooth Aileron grips. Fold your fingers around the chrome "aileron" ridge for a sweet tactile feel. These grips combine a traction-grip smooth rubber surface with a comfortable 1.5" diameter for excellent control in wet or dry weather. The easy to install "glueless" design allows you to remove the grips for service without damage.
56425-02
Fits all '96-later models.
Purchased
Convenient, synthetic leather bags feature a chrome, die-cast Road King Classic logo. Designed to match a Road King Classic seat, the bags are constructed of sturdy synthetic leather, with Velcro® closures that make it perfect for storing smaller items and a zippered inner pocket designed specifically for storing sunglasses.
91219-98 - Left Side
Fits '93-later Touring models equipped with saddlebag guard rails.
Left Side
Purchased
This sturdy synthetic bag features an embossed Harley-Davidson® Bar & Shield logo, a Velcro outer closure on the storage bag and a zippered inner closure to securely keep easy access items, such as sunglasses, wallets and cell phones. This bag also features a removable water bottle with the Bar & Shield logo, providing accessible water anytime on long trips.
91992-98 - Right Side
Fits '93-later Touring models equipped with saddlebag guard rails.
Right Side
Purchased
Accentuate the distinctive shape of Road King Classic saddlebags with these unique, contouring guard rails.
91265-98
Fits '98-later FLHRCI models only.
Purchased
Performance pipes for Harley
V16725 or maybe 16727
Purchased
If a license plate is required, you might as well make it look good. This decorative, chrome-plated license plate frame has three dimensional twist contours, a black "Harley-Davidson" script and a D.O.T. compliant reflector. Stainless steel mounting hardware included. Intended for use with 4"x7" license plate.
59141-98
Fits all models.
Purchased
Turn signal module adds an auxiliary brake light function to your existing turn signals for auxiliary rear lighting. Easy to install, the kit simply plugs into your existing wiring harness. Red turn signal lenses are included. D.O.T. approved. Red lenses may not be legal in all states. Check your local regulations. The FXSTD kit requires installation of longer light stems (included).
91699-99A
Flat Lens Style - Fits all '96-later Softail® models and '97-later FLHT, FLHR and FLTR models equipped with O.E. flat lens style turn signals. (Does not fit with Narrow Chrome Directional Bar P/N 68611-98.)
Purchased
Quick, easy replacement of stock rubber footboard insert. Made from stamped chrome-plated steel and high-durability rubber. Retains cast-in vibration isolation found in stock footboard inserts. Kit includes left and right insert. Patent applied for. Shown with Nostalgic Brake Pedal Pad, P/N 44248-96 (separate purchase).
50187-96
Fits '80-later FLHT, FLT, FLTR, FLHR (except FLHRS), FLHS and '86-later FLSTC, FLSTN, FLSTF and FLSTS models. (pair)
Purchased
Quick, easy replacement of stock Rubber Footboard Insert. Made in the U.S.A. from stamped chrome-plated steel and high-durability rubber. Retains cast-in vibration isolation found in stock Footboard Inserts. Kit includes left and right insert. Patent applied for.
44248-96
Fits '80-later FLHT, FLT, FLHR, FLHS and '86-later FLSTC, FLSTN, FLSTF and FLSTS models. Patent applied for.
Purchased
1/2-inch long stud.
34631-84T
Shifter Pegs (need to purchase 2)
Fits all models.
Purchased
These popular items are now sold individually. Now all you do is choose the style you like, select a Timer or Derby Cover, (or both!) and affix the medallion of your choice to the cover. Works great on medallion, plate-style sissy bar uprights and chrome battery covers too!
99352-82Z
"Bar & Shield" Quantity desired - 3
Universal fit (Intended for truck.)
Purchased
The latest in the family of Road King® Classic inspired accessories, this chrome-plated steel footboard cover features a chrome die-cast Road King Classic medallion with black accents and a stylish leather accent piece. Mounting hardware included.
50246-00
Fits Touring models with stock aluminum passenger footboards. Fits '86-later FL Softail® models equipped with P/Ns 50602-00, 50955-00, 50602-89B and 50955-97A; '87-later FLT, FLHT, '94-later FLHR, and FLHRC; '98-later FLTR models.
Purchased
Hand-polished chrome rack features easily adjustable bracket support.
53341-97A
Fits '97-later FLHR, FLHRC and FLHT Standard models. Also fits '98-later FLTR models. Racks accept the following backrests: Pillow-Look-Oval P/N 52708-97A, Black Spots-Oval P/N 52709-97, Black Spot-Rectangle P/N 52555-94, Low-Profile Leather P/N 52920-98, Top-Stitched Low-Profile P/N 52924-98 and Top-Stitched Large Oval P/N 52886-98.
Purchased
Styled to match Road King Classic and Road Glide models. Large backrest area is great for long touring. Contoured pad provides low back support.
52886-98A
Fits '94-later FLHR, FLHRCI, FLHT, and FLTR models equipped with Luggage Rack P/Ns 53341-97A or 53391-94 or Detachable Sissy Bar Upright P/Ns 52933-97A or 52805-97A.
Purchased
Many of the same features as the Global Battery Charger, but smaller and more economical. It's better than a trickle charger, because of the "smart" feature that turns itself on and off as needed, so your battery never overcharges. Accepts North American voltage (120V), supplied with 2-prong unpolarized plug. Output is 12 VDC @ 750 mA. Charger output leads are equipped with quick disconnect black connectors. Compatible with the alligator clip charging harness (included) and the optional Battery Charging Harness P/N 94624-97A.
94654-98
For 12 Volt Batteries.
Purchased
Heavy-duty Battery Charging Harness with ring terminals and in-line fuse protection for attachment to a Harley-Davidson® 12-volt battery. The wiring harness utilizes a plug connector that is compatible with all Harley-Davidson Battery Chargers equipped with black connectors. The ring terminals are attached to the battery with the harness routed to allow access for the plug connector attachment to a H-D® Battery Charger. The harness plug connector is protected with an attached weather-shield cap when not in use.
94624-97A
For use with Harley-Davidson 12 volt batteries.
Purchased
These factory authorized Harley-Davidson Service Manuals provide details on service and maintenance procedures. Photo at right is not representative of all manuals.
99483-04A
Service Manual
2004 Touring Models
Purchased
With this ATV/Motorcycle Hydraulic Lift you can do your maintenance and fluid changes in comfort while your vehicle is off the ground.
Item: 288826
Available online only
Sam's Club
Purchased